• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need to locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems that include sliding. A window that is sagging can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to get to the frame. After that, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaks in upvc window repair windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may need to be removed before a fresh layer is applied. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The issue could be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also become disaligned as a result of wear, creating a gap where the sash and frame meet. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will lessen draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as you can.