• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out as they please without you having to let them in or out. They also can help to stop your cat from urinating inside the house.

It is much easier to put the cat flap on a Upvc panel than one made of glass but you'll require some expertise and correct tools.

Measure the Door

Installing a cat door into a front door can be difficult however, as long as the cat flap is of the correct one and you follow the guidelines you can make it less difficult. We will help you mark the shape and use a jigsaw in order to cut the door area. Then, we'll finish the job by affixing the cat flap. This will ensure the flap is in place and protects the doors from damage caused by rain and wind.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will ensure that the flap is big enough that your pet can enter and leave the house without having to open and close the door every time, yet small enough to prevent them from moving too far in either direction.

Once you have the measurements you can determine the area on the door where the template should be placed, usually, this is done using an X, but some kits include drawings that show where to drill, if yours does then stick it to the door and draw a line around it. If your door has sill or moulding along the bottom edge ensure that you have clearance from these to keep your cat safe and stop them from gaining access to your home.

Put on your eye protection and dust mask, and using a jigsaw start cutting along the line that you've drawn in, but don't press the blade too hard as this can cause it to cut faster than you'd like it to. If you own a set square then make use of it to verify whether you're cutting in the right way and to ensure that the hole is a good rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great method to let your pet in and out without having to worry about them being in the house with guests or leaving unwanted gifts in the home. It also prevents draughts, and helps to keep your home's temperature in check. However, putting the cat flap to your door could be an overwhelming task for those who've never done it before, leading many people to seek out a professional joiner or carpenter to complete the task. It is an option, but you can do it yourself if your tools are in order and the steps are adhered to.

It is much easier to do on a wooden door, but it is possible with upvc door panel cat flap. However you should be cautious not to scratch the doors because this will make it impossible to claim your warranty. The first step is to measure the door, ensuring that it will fit the new cat flap. This should be simple enough when you have a standard uPVC door, but you might need to take more care if you have an alternative type of door since these can be more difficult to cut than solid uPVC panels.

The next step is to measure the size of your cat's belly. This is the amount of height between the floor and the bottom of your cat's stomach. You will need to locate a space on the door that will allow your pet to comfortably pass through wall cat flap. Once you have the information you'll have to mark the area with a spirit level and a pencil so you are certain that the opening will fit your cat.

Once you've marked the area, you're now ready to cut the hole. You will need a jigsaw and it is essential to take your time to ensure that the cuts are smooth and clean instead of uneven and rough, since this could damage your door. Be sure to wear safety glasses and a dust protection mask at all times when using the jigsaw, since breathing in the dust could be hazardous to your health. After you have finished cutting the hole, you will require sandpaper for smoothing the edges so that the cat flap can be easily fitted into place.

Make a hole

It isn't easy to put an animal flap on the door panel or double glazing cat flap glazing unit. If you are not very experienced in DIY, it is recommended to hire a professional to complete the work for you. A shoddy job might not just be ugly, but also an issue for security as well as allowing cold air to get in when the cat is outside and hot air to escape once inside.

The first thing to do is mark out the location of the hole in the door using a pencil and an ax level. This will ensure that it is placed and runs flush with all the other components of the door. You should make sure you have an sandpaper piece on the ready to smooth out any rough edges.

After the line is traced, you must cut the hole with the jigsaw. Remember to wear the appropriate safety gear for working with a power tool. If you are concerned about the sound produced by a jigsaw you can buy an electric version that is quieter and simpler to use.

It is best to only remove the material needed to create the cat flap. A small amount of material will be required for the thickness of the the flap but cutting off more than this can cause problems and even damage the doors frame.

A door made of upvc could include a metal frame, or panel within it that could interfere with the microchip cat flap, and in this case you'll need to make an oversize hole to ensure the metal does not touch the the cat flap, if this is done, it is crucial to fill in the gap and seal it with water.

If you're installing an animal flap to an upvc door or a double glazing cat flap glazed window with a metal frame, you'll need to talk to a specialist who can provide you with a new glass cat flap installation near me pane that already has the hole for the cat flap inside. It is much less expensive to have this done than to attempt to fix the cat flap onto an existing glass pane that was not designed specifically for the purpose.

Fit the Flap

Cat flaps let your pet leave and come as they please, giving them the freedom to relax inside the house whenever they want to. If you've got an uPVC door, it might be difficult to install an animal flap, especially when you don't have glass panes that could be cut for one. If you are willing to install a half-glazed uPVC replacement panel, it's possible to install the cat flap. It's not just a matter of cutting an opening in the door. You'll also need to perform a few steps to ensure that it is safe.

A composite, uPVC or GRP door panel is usually made up of a plastic skin that is bonded to an insulating polystyrene core. The material is extremely fragile and care must be taken when cutting into it to avoid causing damage. This type of door typically includes a template that you can use as a guide to cut the hole in your door.

After you've marked the position of the hole in your door, it's time to put in the cat flap itself. You can purchase and install many different models that range from simple push-button operated ones to microchip activated units that allow only your pet. No matter which type of cat flaps you select it's essential that your cat Flap In upvc door panel is able to utilize the flap with ease without getting stuck outside in bad weather.

A circular fitting is better than a square, because circles can be cut more securely into glass. This is because square holes are more likely to crack the glass when they're drilled. This is also a safer choice since you don't have to drill into the toughened glass, which could shatter and harm your pet or family members. This is particularly important if you have child or elderly person at home who could be injured by shards of glass.